Woven Plaid Headboard

— WATCH THE BUILD VIDEO ▼—

 

if the video doesn't load, click here to watch ▶︎

 

  

— MATERIALS ▼— 

• Red Oak Plywood — 3/4 in. x 4 ft. x 8 ft  [table top]

• 1 in. x 4 in. — Oak Board 22060 [sides of table legs]

• 1 in. x 2 in. x 8 ft. — Red Oak Board (4-Pack) [table leg frame]

• 1 in. x 3 in. x 6 ft. — Red Oak Board [tabletop edge]

• 1/4 in. x 2 ft. x 2 ft. Sanded Plywood [base board for table legs, front and back] 

• 2 in. x 4 in. x 8 ft. Prime Stud [table legs and stretchers]

• 90 Degree Strut Bracket [to attach stretcher boards to legs] 

• 1 in. Corner Brace (4-Pack) 15315 [to attach tabletop to stretcher boards and legs]

• Power Pro Premium Wood Screw, 9 X 2 1/2 inch [for building the legs]

• Kreg Pocket Screws, 2-1/2-Inch [for attaching stretcher boards to legs]

• Wood glue [for all joints] 

• Clear Construction Adhesive [for attaching gold trim to table and legs]

• Sandpaper, recommended: Mirka Mesh Abrasive Dust Free Sanding Discs [for sanding wood smooth — start with 120 grit, then a pass at 220 grit, then sealing with 3 coats of matte polyurethane, sanding with 320 grit in between coats]

NOTE: pole wrap goes in and out of stock frequently, here are some other options if its not currently available in your area:

• Veneer Red Oak Tambour Sheet, 1/2" slat
• Omega National Products 24 Inch Height, 1/2 Inch Slat Width Flat Style Wood Veneer Tambour Door, Cherry V-3-CH513
• Pole wrap alternative: Bead board paneling 

 

 — TOOLS ▼—